OBIC Industrial Coatings

Manhole RehabilitationOBIC Industrial Coatings

OBIC Industrial Coatings are among the most diverse and dependable sewer rehabilitation and preservation products in the world. Municipalities and businesses in the water and wastewater rehabilitation and coatings industry are learning about the unmatched advantage of OBIC products. Able to address everything from sewer lining and inflow & infiltration issues to manhole rehabilitation. OBIC spray-applied coatings offer a variety of solutions that are customizable.  And they meet the demands of even the most challenging water or wastewater structure rehabilitation project.

OBIC No-dig Sewer Rehab Solutions

OBIC no-dig sewer rehab solutions offer a faster return on investment. Water and wastewater structure rehabilitation options provide long-term solutions to costly and sometimes dangerous situations. Our no-dig sewer rehab solutions mean that your systems can be back up and running with minimal downtime. This offers a cost-effective solution with a faster return on investment. OBIC provides a one-stop-shop to fit your need for no-dig sewer rehab. From grouts to sewer coating, potable water, stormwater, and bridge deck protection.

Manhole RehabilitationOBIC Sewer Lining Repair

OBIC sewer lining repair has you back up and running in no time. With OBIC, you don’t have to replace your systems. Instead, you can maintain that same water or wastewater system and extend its life by 50 years or longer. OBIC’s no-dig technology stops current infiltration by replacing system linings and addresses corrosion issues and prevents future problems. As an added benefit, the installation of OBIC products requires minimal downtime and disruption to service. We understand the importance of getting your services back up and running quickly.

Longevity

Longevity is the name of the game in sewer rehab. When it absolutely, positively must last, OBIC spray on coatings are the empirical favorite. Made of a flexible polymer that is environmentally friendly, OBIC sewer lining repair systems are spray applied and cure in minutes. This means that your next manhole rehabilitation will require minimum downtime and greater protection than thin film or more rigid materials. OBIC products are designed to stop degradation and enhance structural integrity. Our products last for decades without cracking under the pressure of temperature changes or heavy traffic.

Grout TrainingTesting

Testing is required to ensure OBIC products continue to exceed expectations. They are continually tested and backed by a team of chemists who employ rigorous testing to ensure consistency and quality. Additionally, third-party testing has proven that OBIC products are physically stronger than many products available on the market.

OBIC Armor Manhole RehabilitationOBIC Customizable Solutions

OBIC Customizable Solutions are available for even the most challenging manhole rehabilitation project. Water and wastewater structure rehabilitation can require customized solutions depending on the issues and the industry. In these situations, OBIC’s team of chemists works with the customer to develop a customized solution that will meet their unique needs. Every customized product that OBIC offers is backed by our commitment to provide high quality, cost-effective alternatives to the replacement of water and wastewater system components through no-dig technology.

Polyurea

Polyurea products and the properties they include are excellent for the preservation of water & wastewater structures. Ever wonder what makes OBIC coating systems one of the most cost-effective, long-lasting solutions for everything from manhole rehabilitation to sewer lining repair? It is the result of extensive research, development and testing of polyurea chemistry.

Polyurea Benefits

Polyurea Benefits of OBIC products in wastewater structure rehabilitation are many and significant. Uniquely designed to meet the demands of water and wastewater structure rehabilitation projects, OBIC polyurea products have numerous benefits including:

  • They can be spray applied in various environmental conditions including cold temperatures and high humidity.
  • They are fast setting, requiring minimal downtime.
  • They are designed to maintain excellent abrasion and chemical resistance.
  • They can be customized to meet the unique needs of the structure.
  • They are environmentally friendly.
  • They are 100 percent solids, making them compliant with strict VOC regulations.
  • Manufactured in an ISO 9001-2015 certified facility.

OBIC’s Polyurea Products

OBIC’s polyurea products are manufactured in an ISO 9001-2015 certified facility. Each specific product is formulated to maximize its performance based upon the particular application of drinking water, wastewater, stormwater or industrial use. Below is a list of our Polyurea products and their intended uses:

OBIC Armor Manhole Rehabilitation

  •   OBIC 5000: Structural Lining for Water & Wastewater Structure Rehabilitation, Industrial & Manufacturing.

 

 

Manhole Rehabilitation

  •    OBIC 1000: Wastewater Rehab for manholes, industrial structures, water distribution, and transportation.

 

 

Manhole Rehabilitation

  •   OBIC 1200: Pipeline and culvert lining rehabilitation.

 

 

 

Manhole Rehabilitation

  •   OBIC 1100 PW: Potable water containment for industrial, manufacturing, and water distribution preventive coating and rehabilitation.

 

 

 

 

  •   OBIC 1100 Polyaspartic & OBIC 1151: Aliphatic: Manhole rehab, industrial manufacturing, water distribution, and transportation preventive coating and rehab.

OBIC Armor Manhole Rehabilitation

Polyurethane Foam

Polyurethane foam is ideal for wastewater structure rehabilitation and industrial coatings. Polyurethane foam is utilized as middle lalyer (known as the surfacing layer) of the OBIC multi-layer liner system for wastewater structure rehabilitation. OBIC Surfacer 1306 is a spray-applied, two-component, closed-cell polyurethane backing material for primary surface enhancement within the OBIC Armor application.

Typical uses include:

  • Manhole rehabilitation, wet well lining and pump station coatings
  • Masonry stabilization of block and brick for crack filing and surface enhancement
  • Industrial and manufacturing
  • Tank lining
  • Geotechnical surface application

Product Information

OBIC Surfacer 1306 expands to fill in cracks, joints, voids and bug holes in the substrate. This improves the structural integrity and inhibiting sources of leaks and infiltration. Backed by 50-years of foam manufacturing experience, OBIC Surfacer 1306 was developed and tested by chemists and engineers to provide outstanding performance integral to the multi-layer OBIC Armor application.

Polyurethane FoamWater & Wastewater Structure Rehabilitation, Industrial & Manufacturing

Manhole RehabilitationOBIC Polyurethane Grout

OBIC polyurethane grout stops even the toughest leaks. The OBIC family of acrylic, polyurethane, hydrophilic and hydrophobic injection grouts are utilized to stop ground water infiltration prior to installation of the OBIC lining system. Depending on the type of structure and nature of the infiltration, the appropriate grout system is utilized. Some grouts expand in the presence of water while others form a seal to prevent infiltration which may occur during a rain event.

Inflow and infiltration issues

Inflow and infiltration issues must be stopped. And OBIC offers a complete line of polyurethane grout materials for stopping leaks that occur in water and wastewater structures.  Most manhole rehabilitation projects involve brick and concrete structures that have cracks, missing or deteriorated gaskets, pipe protrusions or other pathways allowing groundwater to enter. OBIC products are designed to stop sewer system inflow and infiltration issues, but they will not adhere to running water. Installers must stop any active groundwater infiltration until the OBIC system is applied.  The most common material used by OBIC installers for leak stopping is polyurethane chemical grout.

Customized Solutions

Customized solutions for water or wastewater structure rehabilitation projects allow us to ensure success. Choosing the correct repair material to match the leaking condition is critical for a successful result. That is why the OBIC product line includes both pumped and hand injected polyurethane grouts. All certified OBIC installers are thoroughly trained in the proper grouting systems for stopping leaks in even the most challenging water or wastewater rehabilitation project.

Hydrophilic Polyurethane Grout seeks out water, is absorbed into cracks and pores of the concrete or masonry and has a tenacious bond to wet concrete. It is used to stop leaks via crack or joint injection.

Hydrophobic Grout repels water, and its reaction is not affected by the presence of water. Hydrophobics are not well suited for crack injection, but are excellent for curtain grouting, sealing gushing leaks, compression sealing, void filling, and soil stabilization.

 

 

Contact Us

Contact us at Accujet if you are in need of any water or wastewater coatings or rehabilitation. And feel free to Click the link to watch our videos.

SCHEDULE SERVICE

    OUR CORE VALUES

    • Safety First

      We will always protect our wellbeing.

    • Endurance

      We will go above and beyond all the time.

    • Punctuality

      We will be on time all the time.

    • Think First

      We will think there is no box and always a solution.

    • Honesty

      We will be trustworthy and truthful in everything we do.
    • Team Work

      We will foster productive relationships and work as a team.

    • Cleanliness

      We will be of the utmost clean in our work and appearance at all times.

    WHAT WE CAN DO

    We specialize in a variety of services that allow us to inspect, clean, repair, replace, and line municipal pipes with speed and efficiency. So call us if you have any sewer related issue.

    Hydro Excavation

    Using high-pressure water to remove the soil from around your municipal pipes will allow our team to safely and naturally excavate your property. So the cost and mess will be reduced.

    Cured-in-place Pipe (CIPP)

    Your city’s sewer and drain system needs to be running at all times. So Manhole to manhole pipe lining eliminates the need for excavating your streets.

    Manhole Rehab

    Failing manholes are a common weakness within sewer systems. In addition to I & I problems, leaky manholes cause street problems and costly repairs. We can seal your manholes and return their structural integrity with trenchless methods using OBIC rehab systems.

    Robotic Cutting

    We use industry leading technology to robotically cut and reinstate your pipes from within. And this is safer because human entry is dangerous and prohibitive.

    Jetting and Descaling

    It is essential for your pipes to be thoroughly cleaned with environmentally-friendly techniques. And that's why we have certified professional for the job.

    Cleaning and Televising

    Determining the right solution for your municipal pipes is made possible through effective inspection technology. And it starts with a cleaning and televising plan.

    Call us to schedule your service or request a free estimate today. And we are available 24/7.